Subaru Tranny again...

[HLS]

216 in-lbs...

I dropped by Autozone yesterday and looked on the tool rack. There is a
smallish torque wrench
on the shelf and a much larger one. Both are in the $20-25 range, but I did
not see the quarter
inch beam unit I mentioned.

This was the Suby factory manual.

Factory manuals, at least American ones, are usually very complete. The
Chiltons and suchlike can be very
misleading at time. Some of the things I read in the Toyota manual
reinforce my previous statement. Dont
know whether it is a language translation problem, or a more basic language
problem;>)

 

[Hachiroku $B%O%A%m%/(B]

I dropped by Autozone yesterday and looked on the tool rack. There is a
smallish torque wrench
on the shelf and a much larger one. Both are in the $20-25 range, but I
did not see the quarter
inch beam unit I mentioned.

Took a look on eBay...they're there!

Factory manuals, at least American ones, are usually very complete. The
Chiltons and suchlike can be very
misleading at time. Some of the things I read in the Toyota manual
reinforce my previous statement. Dont know whether it is a language
translation problem, or a more basic language problem;>)

I use a combination of two; the Chilton's or Haynes for the basic stuff,
and the factory manual for more detail...