- Joined
- Dec 22, 2021
- Messages
- 4
- Reaction score
- 0
Hey all, so this may be a new one... but in disassembling the drivers-side primary door-switch plug assembly - which controls the mirror / windows / locks, I managed to yank the wires out of the white rectangular plug (image attached).
This, unfortunately, left me with a clutch of splayed wires - and I now have no idea which order they are supposed to be re-incerted into the plastic block... Doh!
Does anyone out there have a 2003 Subaru Forester that they have access to, that they can pop out that part (the assembly is only held in by one screw in the door) and perhaps take a few zoomed-in pic's of the wires, which demonstrates what order they are supposed to be re-incerted? That, or perhaps someone might have some kind of technical manual that shows what order these wires are supposed to go in?
Appreciate any feedback that anyone here may have.
Andrew
This, unfortunately, left me with a clutch of splayed wires - and I now have no idea which order they are supposed to be re-incerted into the plastic block... Doh!
Does anyone out there have a 2003 Subaru Forester that they have access to, that they can pop out that part (the assembly is only held in by one screw in the door) and perhaps take a few zoomed-in pic's of the wires, which demonstrates what order they are supposed to be re-incerted? That, or perhaps someone might have some kind of technical manual that shows what order these wires are supposed to go in?
Appreciate any feedback that anyone here may have.
Andrew
