.95 Clutch Replacement

[David Shepard]

What are people paying for a '95 Clutch replacement? I am getting quotes of
around $600 - have 144,000 miles on original clutch - anything else I should
have done while they're in there?

 

[Edward Hayes]

Depends on what does the "clutch replacement" consist of ? new pressure
plate+ new clutch disk+ new through out bearing ??? eddie

 

[Jim Stewart]

What are people paying for a '95 Clutch replacement? I am getting quotes of
around $600 - have 144,000 miles on original clutch - anything else I should
have done while they're in there?

Verify that you're getting the following:

New clutch
New pressure plate
New throwout bearing
New pilot bushing

The flywheel probably needs to be resurfaced.

If I were doing it to my car, I'd probably
rebuild the master and slave clutch cylinders
as well.

 

[CEG]

Don't resurface the flywheel...I had mine done a few years age and my
friend....an ASE certified mechanic resurfaced mine. After about 1500 miles
it was at the dealer having a new clutch, pressure plate, throwout brg and
fly wheel installed. Turning the flywheel will destroy the clutch. 500-600
is about right for all new parts except the flywheel.

 

[Edward Hayes]

Machine shops have been resurfacing flywheels for eons without problems if
they use the correct equipment and burnish the surface after the cutting.
eddie

 

[Dominic Richens]

If I were doing it to my car, I'd probably
rebuild the master and slave clutch cylinders
as well.

....except that 95's have a cable clutch